jueves, 31 de octubre de 2013

Teñido con pieles y huesos de aguacate / Avocado pits and peels dye (Persea americana)

Esta es mi primera prueba de teñido con aguacate en la que he utilizado tanto pieles como huesos, pero por separado. Como se puede ver en las fotos (he intentado que sean lo más fieles posibles a la realidad) el color obtenido es un rosa pálido, algo más fuerte en el caso del tinte de huesos de aguacate y algo más anaranjado en el de pieles.

This is my first attempt on avocado dyeing, I've used separately both peels and pits. The final color is a pale pink, the pits gave a brighter shade and the peels an orange-ish tone.

¿Cómo preparar los aguacates?  
How to prepare the avocados?

Se lavan las pieles y huesos muy bien y se cortan a trozos pequeños. Los huesos son más blandos de lo que parecen y con un cuchillo grande se pueden partir en varios trozos. Para que no se estropeen y hasta que juntemos la cantidad suficiente de aguacates, guardamos en el congelador en bolsas herméticas, por un lado los huesos y por otro las pieles. Cuando queramos usarlas sólo hay que sacarlas un rato antes.

Clean and rinse peels and pits before cutting them in small pieces. If you don't have enough quantity of material right now, you can freeze them in two separate bags during days. When you want to use them, just take them out some minutes before.

¿Cómo extraer el tinte?  
How to extract the dye?

Tomamos dos botes grandes, en uno metemos las pieles y otro los huesos, y los llenamos de agua (no totalmente porque hay que poder agitarlos de vez en cuando). Para que el color sea mucho más fuerte añadimos una sustancia alcalina, puedes utilizar amoniaco pero yo usé carbonato de sodio (Na2CO3). Cerramos los botes y los dejamos reposar 3 o 4 días agitándolos de vez en cuando. Es muy curioso ver como el agua de los huesos pasa de ser naranja a rojo oscuro y el de las pieles de verde oscuro a naranja/rojizo oscuro. Esto ya nos adelanta un poco el color que tendrá el tinte finalmente.

In two large pots, we put the peels and the pits, and fill them with water (not completely because you have to shake them from time to time). For a much stronger color we add an alkaline substance, you can use ammonia but I used sodium carbonate (Na2CO3). We close our pots and let them stand 3 or 4 days of shaking them occasionally. It is very interesting to see how the water with  the pits inside changes from orange to dark red, and the one with the peels from dark green to orange / reddish dark. This is already giving us a clue of the final color.

¿Cómo teñir?  
How to dye?

Colamos el agua y apartamos los huesos/pieles ya que probablemente podamos volver a teñir con ellos aunque la intensidad del tinte será menor.
Añadimos este agua a una olla grande (tiene que caber bien lo que vamos a teñir) y calentamos hasta que llegue a unos 90ºC. Añadimos entonces las madejas (previamente han estado 1 hora en remojo) y cubrimos con agua para que puedan moverse sin pegarse y que el tinte quede uniforme.
A los 30 minutos apagamos el fuego y dejamos reposar toda la noche. A la mañana siguiente sólo tenemos que lavar las madejas con jabón neutro y agua y dejar secar.

We strain the water and put aside the pits and peels as we can probably re-dye with them, although the dye will be less intense.
We add the dyed water to a large pot (all we want to dye must fit inside) and heat it until it reaches 90°C. Then we add the skeins (they have previously been soaked around 1 hour) and cover them with water so that they have enough to move without problems and dye uniformely.
After 30 minutes we turn off the heat and let stand overnight. The next morning we only have to wash the skeins with mild soap and water and allow to dry.

NOTA: las fibras han sido lavadas y mordentadas previamente con alumbre al 15% y cremor tártaro al 8%. La madeja de algodón además tiene un premordentado de taninos extraídos de la cáscara de la granada.

NOTE: fibers have been previously washed and mordanted with alum 15% and tartar 8%. The skein of cotton has also been mordanted first with tannins extracted from pomegranate peels.


 Fibras de seda, madeja de algodón, madeja de lana merina y madeja de lana de alpaca teñidas con hueso de aguacate.
Silk fibers, cotton yarn, merino wool yarn and alpaca yarn dyed with avocado pits. 



 Fibras de seda, madeja de algodón, madeja de lana merina y madeja de lana de alpaca teñidas con piel de aguacate. 
 Silk fibers, cotton yarn, merino wool yarn and alpaca yarn dyed with avocado peels. 

lunes, 28 de octubre de 2013

Malva silvestre (Malva sylvestris)

Hace un par de semanas traté de extraer el color de un puñado de malvas silvestres que crecen cerca de mi casa para hacer algunas pruebas de teñido. Las dejé en agua caliente para hacer una especie de infusión pero perdieron su color rápidamente y el agua ni siquiera estaba coloreada. Parece que esta no es la forma de hacerlo, tengo que seguir investigando.


Some weeks ago I tried to extract color from a bunch of mallows which grow nearby in order to make some dye experiments. I infused them and they lost its color really fast, water wasn't even colored. It seems this is not the way to do it properly, I should keep on trying.